- ページ 5

ヘッドセット ATI Electronics H901AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ATI Electronics H901A 13 ページ。

Charging the battery

This headset has an internal, non-removable, rechargeable battery. Do not attempt to remove

the battery from the device as you may damage the device. Please refer to the following step to

charge the battery:

1. Connect the charger to the correct outlet.

2. When the charger is connected to headset, the red indicator

light will turn on during charging. Charging the battery

fully may take up to 2 hours.

3. When the battery is fully charged, the red indicator light

will turn off. Disconnect the charger from the headset and

the wall outlet. The headset is ready to use.

NOTE:

The fully charged battery has power for up to 3 hours of talk-time

or up to 100 hours of standby time. However, the talk and standby

times may vary when used with different mobile phones or other

compatible Bluetooth devices, usage settings, usage styles, and

environments.

When battery power is low, the headset will remind you by beeps every

20 seconds, and the red indicator light starts to flash.