- ページ 6

試験装置 Andatech SentryのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Andatech Sentry 20 ページ。 Baton breathalyzer

Device is in calibration lock status and cannot be used.

Contact technical service provider to get the unit calibrated.

Battery level indication

This indication will only appear before the warming up status when the

device is switched on.

Low battery level indication while device is in ready to blow status.

The batteries need to be replaced immediately.

* Low battery level indication could be displayed under WHITE LED

status as the power consumption of the WHITE LED is much higher than

that of other LED colours.

Device is under calibration grace period (DAYS or COUNTS)

Device needs to be calibrated before it enters calibration lock status.

Flow error: The breath sample was not strong enough.

Get the subject to blow strong and steady during sampling.

USB cable is connected to the device.

PC software is connected to device.

Err1 error: Pressure sensor is damaged. Contact your technical service

provider.

Err2 error: Alcohol sensor is damaged. Contact your technical service

provider.

Err3 error: Timer or timer battery is damaged. Contact your technical

service provider.

Err5 error: Memory damaged. Contact your technical service provider.

Err8 or Err9 error: Alcohol sensor damaged. Contact your technical

service provider.

Device is ready to switch off. Press power button once to switch off the

device.

Device is switching off.