- ページ 4

アンプ ATI Technologies AT4000のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。ATI Technologies AT4000 13 ページ。 2 to 7-channel power amplifier

Getting to Know the Rear Panel

A. Balanced XLR Audio Inputs

Use the BALANCED INPUT jacks to connect to the outputs

of a preamplifier or other control device with XLR outputs.

B. Input Selector Switch

Selects either the BALANCED INPUT (XLR) or the UN-

BALANCED (RCA) INPUT jack.

C. Unbalanced Audio Inputs

Use the UNBALANCED INPUT jacks to connect to the out-

puts of a preamplifier, receiver with preout connections, CD

player, or other source device with RCA style outputs.

D. Product Serial Number

Enter into the space provided on Page 10.

E. Ground Terminal

Use to interconnect chassis where necessary.

A B

Connecting Your Amplifier

When making connections between any source components and the amplifier, or when making connections to any speaker, be certain

that both the input devices and the amplifier are turned off. To assure that there will be no unwanted signal transients that can damage

equipment or speakers, it is always best to unplug all equipment before making any connections.

F. Remote Trigger Input

Use the REMOTE TRIGGER jack to connect to a compatible

preamplifier, source device, or other product with a

3.3-24 VDC output.

G. Master Power Switch

Turns the current to the amplifier on or off.

H. Speaker Outputs

Use the OUTPUT binding posts to connect the amplifier to your

speakers; red for positive, black for negative.

I. Power Supply Voltage Indicator

The proper line-voltage is marked in green.

J. AC Input

Use the included power cord to connect your amplifier to an

AC power source.

Page 4