- ページ 11

溶接システム ANDELI MCT SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。ANDELI MCT Series 20 ページ。 Multifuction welding&cutting machine

5.5.3 TIG Welding Installation

By pressing function selection button on front panel

By pressing setting button

2T or 4T working mode.

Under Pulse node, by pressing button

By pressing "Gas Check"

When select "Cold"function, by pressing button

parameter.

Note:Cold welding suitable for thin plate welding.

Note: For details,please refer to Page6, the "Panel description".

gas cylinder

220V

(3)to turn ON or OFF pulse;By pressing setting button (8)to

button to check gas.



Connect Lift TIG torch Quick Connector to

the negative (-) output welding terminal.



Connect Earth Lead Quick Connectorto

the positive (+) welding output terminal.



Connect the air hose of Lift tig torch with

the Argon meter connector. See picture

below.



Connect gas cylinder to the TIG gas

inlet.Turn on the gas valve and adjust to

the desired flow. Connect to AC 220V

input voltage,Turn on the power switch to

start

the machine.

,to select TIG working mode.

to select and adjust the welding parameter.

to select and adjust the welding

select