- ページ 9

ビデオゲームアクセサリー Carmelli NG1022MのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Carmelli NG1022M 16 ページ。 3-in-1 flip table
Carmelli NG1022M にも：アッセブリー指示書 (18 ページ)

ASSEMBLY INSTRUCTIONS (CONT.)

THANK YOU!

STEP 6 - ASSEMBLE CABINET (TABLE TOP) TO LEGS

All bolts and screws from previous steps must be tight. Two adults are recommended for this

step.

1. Engage all four table locks.

2. Locate the two large bolts (#18). Place a washer (#19) onto each bolt.

3. Place a second washer (#20) onto the bolts.

4. Finger start a bolt into each end of the cabinet (#1).

5. Place the cabinet into position. The bolts will drop into the slots at each end. The smaller

washer must be outside the end panel and the plastic washer must be between the end

panel and the cabinet.

NOTE: The electrical cord must be loose.

6. Open the table locks. Tighten the bolts until they are snug and the cabinet can rotate

smoothly.