- ページ 7

アクセサリー Dreamland D3333のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dreamland D3333 12 ページ。 Luxury velvet heated overblanket

WARNING! DO NOT use this appliance if there are visible

signs of damage.

WARNING! NOT suitable for children under the age of 3.

Your Dreamland Intelliheat overblanket is designed to FAST PREHEAT your bed and it also responds

to temperature changes while you sleep.

IMPORTANT: The time required to heat the electric blanket may vary depending on the room

temperature. To judge the temperature accurately, lie in the bed with the covers draped over

you. Do not rely on a hand placed on the bed.

WARNING! This appliance is only to be used with the control

unit supplied with it. The reference of the control unit is

specified on the label sewn onto the appliance.

WARNING! DO NOT place the control unit under the pillow or

under the sheets when in use.

WARNING! When used as a throw never position the control

unit or the flexible electric wire over or under the throw.

Never cover the control unit with the electric throw.

Connect the control connector into the blanket socket then plug into the mains socket (Diagram [A]).

Switch on your Intelliheat overblanket from the back of the control (11) (Diagram [D]), by positioning the

switch ON (I). The temperature setting (4) (Diagram [D]) will default to the last one used, providing it has

been set to that number for a period longer than 5 minutes.

TO HEAT UP YOUR INTELLIHEAT OVERBLANKET, YOU MUST ALWAYS PRESS THE READY FOR

BED FAST PREHEAT BUTTON. DO NOT GET INTO BED WITH YOUR OVERBLANKET ON THE

READY FOR BED FAST PREHEAT TEMPERATURE SETTING.

WHEN USING AS A THROW, PRESS THE FAST PRE-HEAT BUTTON, THEN AFTER 5 MINUTES,

WHEN YOU ARE READY TO RELAX, SELECT A SETTING FROM 1 TO 5 TO FIND YOUR PREFERRED

CONTINUOUS USE TEMPERATURE.

READY FOR BED FAST PREHEAT: Press the Ready for Bed, fast pre-heat button on the front of the

control (8) (Diagram [D]). The setting (5) (Diagram [D]) will be illuminated in red on your LED Display (3)

(Diagram [D]). Your blanket will be lovely and warm in just 5 minutes.

TO SET FOR ALL NIGHT USE/CONTINUOUS USE: RELEASE the Ready for Bed fast pre-

heat button, and press the temperature button (9) (Diagram [D]) to select your preferred all night

temperature setting from 1 (min) to 5 (max). The higher the number, the higher the temperature. This will

be illuminated in orange on the (3) LED display (4) (Diagram D).

1 OR 9 HOURS AUTO SHUT OFF TIMER: The Intelliheat control has an AUTOMATIC SHUT OFF TIMER.

MI002689_D33.indd 5

USING YOUR BLANKET

30/03/17 16:06