- ページ 5

除湿機 Anden A210V1のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Anden A210V1 16 ページ。
Anden A210V1 にも：クイック・スタート・マニュアル (4 ページ), クイック・スタート・マニュアル (2 ページ)

SUSPENDING THE DEHUMIDIFIER

The brackets are designed to accommodate up to 1/2" threaded rod�

1. Insert bracket into slots on the bottom of the base� See FIGURE 4�

2. Rotate the bracket up toward the dehumidifier� With a 5/16" hex socket (not provided), secure the bracket to the side of the dehumidifier using

#10 sheet metal screws (provided)� See FIGURE 5�

3. Repeat for remaining three brackets�

FIGURE 4 – INSTALL MOUNTING BRACKET IN BASE

INSERT BRACKET INTO

OPENINGS ON BOTTOM

OF UNIT – 4 PLACES

90-2397

Use the threaded rod to suspend the unit from appropriate ceiling

structure� The unit weight is 118 lbs� Install vibration isolators if located in

an area where noise could be a concern� Level unit right to left and front

to back so that unit drains properly�

Use duct kit part number 5790 for installing ductwork to the

dehumidifier� Reference the instructions provided with duct kit 5790 for

installation details�

FIGURE 5 – SECURE BRACKET TO DEHUMIDIFIER

90-2398

FIGURE 6 – SUSPENSION

ROTATE BRACKET INTO

PLACE AND SECURE WITH

SCREWS PROVIDED

4X VIBRATION ISOLATOR

(OPTIONAL)

90-2399

English 5