- ページ 9

アクセサリー Dreamland F2113のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dreamland F2113 12 ページ。 Heated mattress cover

gB
MACHINE WASH
The mattress cover may be washed in a washing machine at 40° C on a wool
programme.
NEVER DRY CLEAN
Spin dry on wool programme only. DO NOT use an extra spin cycle.
HAND WASH
1.
Use a mild washing powder or detergent and luke warm water to soak your mattress
cover for 15 minutes. After soaking, gently wash the throw and rinse thoroughly with
clean, lukewarm water.
2.
Allow the excess water to drain from the mattress cover. It may also be gently
squeezed, but never wring the mattress cover.
DRYING
1.
Tumble dry on low settings.
2.
Air dry on a clothes line, but do not use clothes pegs on the wired area of the blanket
as they may damage it.
3.
DO NOT use your mattress cover until it is completely dry.
NO BLEACH
Do not iron
STRETCHING
1.
The mattress cover must be stretched back to approximately its original size during
the drying process. This is best done whilst damp, working from side to side, stretching
a strip at a time. This procedure may need to be repeated a few times until fully dry.
2.
Inspect the mattress cover to ensure that none of the wires have formed into loops,
or become twisted back on themselves. Holding the mattress cover up to the light
will make it easier to inspect the wires.
3.
If any problems with the wires persist after the stretching process, or the mattress
cover does not return to close to its original size, return it along with the control to
our Service Centre for a safety inspection.
When not in use store as follows:
ATTENTION! When storing the appliance, allow it to cool
down before folding.
ATTENTION! Avoid creasing the appliance.
ATTENTION! Do not place heavy items on the blanket when
in storage, as deep creases or folds may damage the wiring.
5

STORAGE