- ページ 10

産業機器 ATI Technologies QC-303のPDF マニュアルをオンラインで閲覧またはダウンロードできます。ATI Technologies QC-303 17 ページ。 Robotic tool changer

Manual, Tool Changer, QC-303
Document #9620-20-B-303 Base Tool Changer-09

4. Maintenance

ATTENTION: The cleanliness of the work environment strongly influences the trouble-free
operation of the changer. The dirtier the environment, the greater the need for protection
against debris. Protection of the entire EOAT, the master, the tool and all of the modules
may be necessary. Protective measures include the following: 1) Placement of tools
stands away from debris generators, 2) covers incorporated into the Tool Stands (see
Section 2.3—Tool Stand
devices built into the EOAT and the Tool Stand.

4.1 Preventive Maintenance

The Tool Changer and optional modules are designed to provide a long life with regular
maintenance required.
A visual inspection and preventative maintenance schedule is provided in the table below
depending upon the application.
Detailed assembly drawings are provided in
ATTENTION: All Tool Changers are initially lubricated using MobilGrease®
XHP222 Special grease. The end user must apply additional lubricant to the
locking mechanism components and alignment pins prior to start of service (See
Section 4.2—Cleaning, Lubrication, Adjustment and
lubricant for this purpose are shipped with every Tool Changer. Note:
MobilGrease® XHP222 Special is a NLGI #2 lithium complex grease with

Pinnacle Park
1031 Goodworth Drive
Design), and 3) guards, deflectors, air curtains, and similar
Apex, NC 27539
Tel: 919.772.0115
B - 10
Section 8—Drawings
of this manual.
Replacement). Tubes of
Fax: 919.772.8259
www.ati-ia.com