- ページ 6

冷凍庫 Electrolux B 522 MのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux B 522 M 10 ページ。 Upright freezer
Electrolux B 522 M にも：ユーザーマニュアル (8 ページ)

ページを印刷する

caused when the blade touches against wood

or solid bodies, such thrust might then cause

the operator to loose control of the machine

itself. Never attempt to work with a damaged

blade but replace it with a new one.

THRUST: can occur when using any type of circu-

lar blade within the risk area: therefore it is advis-

able to cut using the remaining area of the blade.

CIRCULAR SAW BLADE: it can be used to cut

sappling, small trees with a diameter up to 7

cm., to clean shrubs.

WARNING: IF A METAL 24-80 TOOTH BLADE

(A SAW TOOTH BLADE) IS USED A DOUBLE

Warning! The brushcutter "four stroke 52 PM "

is equipped with a special 4 stroke engine with

waste lube , consequently it requires a totally sintet-

ic 2 stroke engine oil or a McCulloch branded 2

stroke engine oil and unleaded petrol mix with a

minumum octane rating of 90 (see chart).

Warning! Do not use gasoline for any reasons,

as the engine will be seriously damaged.

IMPORTANT

Always shake the fuel mix container thoroughly

before pouring any fuel mix.

Fuel mix properties may deteriorate with time and

should be used up within 2 months.

We recommend that you prepare fuel mix accord-

ing to your immediate requirements only. Never

use fuel mix more than 2 months old so as to

avoid possible engine damage.

WARNING

Do not smoke when re-fuelling.

1) In the interest of safety, it is imperative that the

unit is used with the correct guard when using

any blade or a nylon string head, except the 24-

80 tooth blade. Line cutter blade (L): assemble as

illustrated.

2) When using a saw tooth blade (optional acces-

sory), the correct guard must be fitted (P/N

240553).

A double shoulder harness must also be worn.

ENGLISH - 4

SHOULDER HARNESS AND A SAFETY

GUARD (PROTECTION) MUST ALSO BE USED

AS MARKED IN THE SUMMARY CHART (SEE

CLOTHES SECTION IN SAFETY CHAPTER:

ALWAYS WEAR A HELMET).

ALWAYS USE GENUINE ACCESSORIES AND

SPARE PARTS AVAILABLE FROM AUTHORISED

SERVICING DEALERS.

THE USE OF NON-ORIGINAL ACCESSORIES

AND SPARE PARTS INCREASES THE RISK OF

ACCIDENTS AND IN SUCH A CASE THE

COMPANY IS NOT LIABLE FOR DAMAGE TO

PEOPLE AND/OR THINGS.

D. Fuel mix

Always open the fuel cap slowly, to release any

pressure build up in the tank.

Re-fuel in open spaces only, keeping away from

naked flames or sparks.

SAFE STORAGE OF FUEL

Petrol fuel mix is highly inflammable. Put out all

cigarettes, pipes and cigars before working with

fuel. Avoid spilling fuel.

Store fuel in a cool, well ventilated place, in an

approved container specifically designed for the

purpose. Never store engine with fuel in the tank in

enclosed, poorly ventilated areas, where fuel fumes

may reach an open flame, spark or pilot light such

as in a furnace, water heater, clothes dryer etc.

Petrol fumes can cause an explosion or a fire.

Never store large amounts of fuel.

To prevent possible restarting problems avoid

running the fuel tank dry. This also helps to

extend engine life.

E. Safety guard assembly

Only use blades or nylon string heads clearly

marked with a maximum speed of at least 10,500

min

Follow the fitting instructions carefully.

N.B: Saw tooth blades (24 - 80 tooth) have a

central base diametre of 20mm and therefore

require the use of the appropriate size top flange

to ensure a correct fit. The part number is

detailed in the cutting attachment summary chart.

-1