- ページ 18
冷凍庫 Electrolux BMI 190のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux BMI 190 44 ページ。
18 electrolux
EN
Drinks Chill function
Use this function as a safety warning when
placing bottles in the freezer, as they may
burst when forgotten in the appliance.
Press button (D) several times until the
corresponding symbol (
the display.
Press button (E) within a few seconds to
confirm the Drinks Chill activation. The
symbol (
) stops flashing and you will
hear a beep.
Press button (B) several times or
continuously to set the desired number of
minutes (from 1 to 90 minutes).
Place the drinks in the freezer.
At the end of the set time, the alarm will
beep and the symbol (
will flash on the display.
Press button (E) to switch the alarm off.
Remove the drinks from the freezer. It is
possible to de-activate this function at any
time by pressing button (D) until the
corresponding symbol (
the display again and then by pressing
button (E) to confirm the de-activation.
Eco Mode function
Use this function to automatically set the
freezer temperature to its best level (- 18°C),
which guarantees proper conservation of
frozen
food
at
consumption.
Press button (D) several times until the
corresponding symbol (
the display.
Press button (E) within a few seconds to
confirm the Eco Mode activation. The
symbol (
) stops flashing and you will
hear a beep. It is possible to de-activate
this function at any time by pressing
button (B) to change the selected
temperature and then by pressing button
(E) to confirm the selection.
) flashes on
) and the time
) flashes on
the
lowest
energy
) flashes on
Child Lock function
This function prevents children from
playing with the buttons on the control
panel. Any possible pressing of the
buttons will have no effect.
Press button (D) several times until
the corresponding symbol (
flashes on the display.
Press button (E) within a few
seconds to confirm the Child Lock
activation. The symbol (
flashing and you will hear a beep.
The buttons on the control panel
are now locked. It is possible to
de-activate this function at any time
by pressing button (D) until the
corresponding
flashes on the display again and
then by pressing button (E) to
confirm the de-activation.
Alarm
If the freezer temperature is not
sufficiently low, the alarm will beep
and the symbol (
temperature indication will flash on
the display. When normal conditions
are restored, only the freezer
temperature continues to flash.The
highest temperature the freezer
reached is memorised.
Press button (E) to switch the
alarm off. The highest temperature
the freezer reached then appears
on the display for some seconds.
Then the display returns to
showing the temperature of the
freezer.
The symbol (
long as the temperature in the
freezer
is
temperature set.
The alarm can be due to:
Insertion of a large amount of fresh
food.
) stops
symbol
(
) and the
) remains on as
higher
than
the
)
)