- ページ 10
送信機 Communications Specialties Fiberlink 7500 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Communications Specialties Fiberlink 7500 Series 20 ページ。 7500 series dvi and stereo audio transmission over one single mode or multimode fiber
Fiberlink® 7500 Series
Lock Bandwidth and Input Equalization
The 7500/7510/7514 and 7502/7512/7516 transmitter units have a Lock Bandwidth (BW)
and Input Equalizer (EQ) Setting Dip switches located on the front panel. The default
equalizer (EQ) setting is for a short DVI cable, less than 10 feet. The default Bandwidth (BW)
setting is NARROW BW. This should work for most clean, "noise-free" DVI sources. A narrow
bandwidth setting should be used for dirty or noisy DVI sources.
Factory Default:
Switches 1, 3 and 4 in the up position; switch 2 in the down position.
1 2 3 4
BW
EQ
Lock Bandwidth:
Switches 1 and 2 control the Lock Bandwidth:
Wide
1 2 3 4
BW
EQ
Input Equalization:
Switches 3 and 4 control the Input Equalization:
Short
1 2 3 4
BW
EQ
Page 10
Medium
1 2 3 4
BW
EQ
Medium
1 2 3 4
BW
EQ
Lock Bandwidth & Input Equalization
Narrow
1 2 3 4
BW
EQ
Long
1 2 3 4
BW
EQ
Fiberlink® 7500 Series User's Manual
Very Narrow
1 2 3 4
BW
EQ
Very Long
1 2 3 4
BW
EQ