- ページ 4
カーナビゲーションシステム CarNavi-Tech Mercedes09のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。CarNavi-Tech Mercedes09 4 ページ。
ページを印刷するINPUT switch
There are 2 ways to switch the input
With the CAN BOX，press the "hang-off" on the steering
wheel.
The user may also use the extra small keypad
CAN Connection:
BIG
Red：Battery12V；BIG
Brown with
Red： CAN+（HIGH）.
Orange：
CAN‐（LOW）.
RED：BATTERY 12V。
Yellow：ACC OUT
BLACK：Ground for chassis。
GREEN：reverse signal lien[=12V when reverse]，should be
connected to rear lamp.
GRAY：When car with OEM camera input 12V Reverse
lamp ,screen will change to original camera input
BLUE/BLACK：CAN-L
YELLOW/BLACK:
Accessories：
（1） [ ] One interface box
（2） [ ] one CAN box with power cable.
（3） [ ] one daughter board with 50P other-side ribbon，60P same-side ribbon
（4） [ ] AV input wire 2PCs，CAM wire 1PC, RGB wire 1 PCs.
[ ]keypad 1 PC.
（5）
4 / 4
The CAN box will decode the CAN data, and generate
the ACC, switch-signal for the interface.
The ACC can be used for extra devices like reverse
camera and TV tuner. The interface box itself does not use
ACC, it will power on/off automatically when the monitor
turn on/off.
[CAN box wrong connection will not damage or hurt
any device, when correctly connected, the LED will be
Brown：GND
blinking with data.]
7P signal definition：
CAN-H
SUNE TECHNOLOGY ELECTRONIC CO., LTD
No.9, Land 606,Anping Rd., Tainan City 70849 Taiwan
Tel: +886-62292246 Fax:+886-62288104
Website http://www.sune-tech.com
Shop http://www.carnavi-tech.com
Skype : hsin_han99 or sune_tech
。
7P connector
to interface ：
CAN inputs： CAN+，
CAN‐，BATT，GND