Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Condensation container
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Cottons 8 kg
Cupboard Dry*
Iron Dry*
Easy-Care 3.5 kg
Cupboard Dry*
*Test program according to DIN EN 61121.
**The values may differ from the those specified depending on the type of fabric, mixture of
laundry to be dried, residual moisture in the fabric and loading capacity.
Drum interior light
(depending on model)
The drum is illuminated after the door is opened or closed, and also after the programme is
started. It goes out automatically. Replacing the bulb
Optional accessories
Connection fittings for condensation outlet
WTZ
The condensation is conveyed directly via a hose.
1110
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
11310
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WTZ 11300.
Installation underneath the worktop
WTZ
10290
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
60 x 60 x 85 cm (height adjustable)
approximately 45 kg
8 kg
4.2 l
see appliance rating plate
These are guide values determined under standard
conditions.
Fluctuations up to 10% are possible.
Spin speed in rpm
Drying time
(residual moisture)
in min.**
13 A
1400 (approx. 50 %)
105
1000 (approx. 60 %)
122
800
(approx. 70 %)
139
1400 (approx. 50 %)
83
1000 (approx. 60 %)
100
800
(approx. 70 %)
117
1000
39
800
(approx. 40 %)
42
600
(approx. 50 %)
51
(bulb E14, 25 W)
Page 10.
(order from the after-sales service using the order number)
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed after-sales service directory, or by
calling one of these numbers:
– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator lamp
does not light up.
Container
The
Start/Stop indicator lights are
flashing.
Filter
The
and
Energy
indicator lights are flashing.
consumption
Dryer does not start.
in kWh**
13 A
3.74
Water is running out.
4.49
5.17
The door opens by itself.
2.24
Creasing.
3.44
3.86
1.05
Drying result is not satisfactory
(laundry feels too damp).
1.35
1.65
Drying time too long.
The humidity in the room
increases significantly.
Mains failure.
One or more indicator lights for
programme status are flashing.
The interior light is not working
(depending on model).
9
Mains plug plugged in?
Programme selected?
Empty the condensation container.
and
If featured, check hose for condensation outlet.
Clean the fluff filter and/or air cooler under running water
Start/Stop
Page 4/6.
Start/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Align dryer horizontally.
Clean air cooler seal.
Push the door closed until you hear it engage.
Laundry load exceeded?
Remove articles of clothing immediately after
the end of the programme, hang up and pull into shape.
Unsuitable programme selected
Warm laundry feels damper than it actually is.
The selected programme does not suit the load. Use another
drying programme or, in addition, select the time programme
Page 7.
Use fine adjustment for the drying result
Fine layer of limescale on the humidity sensors
Clean the humidity sensors
Programme termination, e.g. tank full, mains power supply failure,
door open or maximum drying time reached.
Rinse the fluff filters under running water
Insufficient supply of air
Air inlet possibly blocked
Ambient temperature higher than 35 °C
Make sure the room is sufficiently ventilated.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
Clean filter and air cooler
Check installation conditions
Switch off, leave to cool down, switch on again, restart
programme.
Pull out the appliance plug, remove the cover cap in the interior
above the door (use Torx 20 screw driver) and replace the bulb.
Close the cover cap.
Never operate the dryer without a cover cap.
Page 7.
Page 5/6.
Page 6.
Page 4.
ensure that air can circulate.
Clear inlet
Page 8.
ventilate the room.
Page 4/6.
Page 8.
10
ページを印刷する