- ページ 8

インターホン・システム ATIGO A3202のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ATIGO A3202 15 ページ。 2 wire digital video system

Digital display module A3203
Digital display module is also design as a
proximity card reader with up to 320 user tags
capacity. Reader supports 125KHz and
13.56MHz unencrypted RFID tags
Use supplied master tags to add and delete
user tags.

Programming Tags

Add user tags
1.
In standby mode present
MASTER CARD ADD tag to card
reader
2.
Use keypad to enter room number
new user tag need to be associated
with and press # to confirm.
3.
Tap to add all user tags associated
with selected room.
4.
Repeat steps 2 and 3 to add more
user tags
5.
Present MASTER CARD ADD tag
to finish.
Delete specific user tags
1.
In standby mode present
MASTER CARD DELETE tag to
card reader.
2.
Present user tag you wish to delete
to card reader.
Or use keypad to enter room
number you wish to remove all user
tags from and press # to confirm.
3.
Repeat steps 2 to remove more
user tags.
4.
Present MASTER CARD DELETE
tag to finish.
Delete all users and tags
1.
In standby mode present
MASTER CARD DELETE tag to
card reader, wait for double beep.
2.
Present MASTER CARD ADD tag
to card reader, wait for double
beep.
3.
Once more present
MASTER CARD ADD tag to card
reader, wait for single beep.
4.
Wait 10 seconds for reader to
return to standby mode.
Program new MASTER CARD tags
1.
Make sure all modules are
connected and powered up.
Link together wires EB+ and EB –
2.
on audio/video module and wait for
a beep
3.
Switch ON and OFF DIP switch 4,
four times, wait for double beep.
4.
Wait 10 seconds for reader to
return to standby mode.
8 |
P a g e