- ページ 8
ドライヤー Bosch ElectricのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch Electric 12 ページ。 Electric vented dryer; electric condensation dryer
ページを印刷する
The program will continue to the end, when the
"End" indicator lamp will become illuminated. And
if the "End of Cycle Signal" has been selected a
signal will sound.
Note: If the load is not removed, the drum will, for
the following 35 minutes, rotate at brief
intervals to prevent wrinkling (Anti-Crease).
After 35 minutes this feature will cease its
function. It is recommended that the dryer
be unloaded no later than 35 minutes after
completion of program to avoid wrinkling.
7. Select ADDITIONAL FUNCTIONS, if desired
The additional functions available are accessible
by depressing the buttons:
"DELICATES"
The "DELI CATES" button, see Figure 5, will
reduce the drying temperature and lengthen the
drying time when depressed. It is recommended
that the "DELICATES" button be depressed when
drying heat sensitive fabrics, such as, acrylics. Be
sure to follow the instructions listed on the care
label instructions.
"END OF CYCLE SIGNAL"
When the "END of CYCLE SIGNAL" button, see
Figure 5, is activated there will be a signal
sounded at regular intervals at completion of the
selected program.
The volume level of the sound may be changed by
holding the button in until desired volume level is
reached. This volume level will be stored for future
use until altered.
The end of cycle signal can be switched off by
depressing the button again. The indicator light
above the button will turn off to indicate that the
signal is no longer selected.
0ryInQ
Damp DI)'
o
0
~~
~
c=::::z=)
Figure 5.
R<9ula, DI)'
Extra Dry
Anti-Crease/End
0 0 0
I
O
Start
I
Deli-
I
End
Df
Cycle
cales
Signal
o
0
c:=:=::=>
c::::;:::::::::
c::::z::::::>
~ ~ ~
Cycle Counldown
<9
I
Cycle TIme
Minutes
o
=
=
8
8. Press the "START" Button
Depress the "START" button. The indicator light
above the "START" button will become illuminated
and the machine will start. If one of the Auto
Cycles has been selected the Duotronic system
will continuously monitor the moisture level of the
load and display the progress in the "Moisture
Level Indicator Lights." If a timed cycle has been
selected, either Heated Dry or Air Fluff, the
minutes remaining in the program will be shown in
the "Cycle Countdown Display."
9.
Depress the "DOOR" button
The door will open.
10. Remove the Laundry from the Dryer
11. Clean the Lint Filter
The lint filter, located in the door, should be
cleaned after each load. Cleaning the filter will
shorten drying times and save energy.
12. Turn Off the Dryer.
Depress the "ON/OFF" button.