- ページ 3
スピーカー Community MX10のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Community MX10 4 ページ。 M class stage monitor
Community MX10 にも： オーナーズマニュアル (4 ページ)
ページを印刷する
INSTALLATION
MX stage monitors can be placed on a stage or floor, or can be permanently mounted to a surface using the
appropriate yoke (MX-Y8 or MX-Y10). Instructions for yoke attachment are included with the yokes.
Wired / cable connections can be made to the input panel using the terminal block or NL4-type connectors.
IMPORTANT SAFETY INFORMATION
Modern professional power amplifiers are capable of delivering lethal voltages. Installation and service
personnel must be cautious to ensure that all amplifiers are disconnected from the AC Mains supply whenever
such personnel might potentially come in contact with un-insulated wiring.
When installing the bracket and loudspeaker, or otherwise suspending the loudspeaker by any other means, it is
essential to adhere to safe rigging and construction practices. Installation of loudspeakers should only be
performed by trained and qualified personnel and it is strongly recommended that a licensed and certified
professional structural engineer approve the mounting design.
MX8/MX10 LOUDSPEAKER SPECIFICATIONS*
MODEL
Loudspeaker Type: Two-way, full-range 8-inch coaxial
Operating Range: 80 Hz to 18 kHz
Max Input Ratings: 150W continuous / 375W program
Sensitivity 1W/1m: 96.4 dB SPL
Maximum Output: 117 dB SPL
Nominal Impedance: 8 ohms
Nominal –6dB Beamwidth: 115° Conical
Input Connection: (2) Paralleled NL4-type connectors
Required Accessory: 24 dB/Octave 100 Hz high pass filter
Optional Accessory: MX-Y8 Yoke mounting wall bracket
Dimensions—Height:
Width (front):
Shipping Weight: 23 lbs (11 kg)
*Community strives to improve its products on a continual basis. Specifications may therefore be subject to change without notice.
floor monitor, passive crossover
90 Hz to 16 kHz (+/-3dB)
(125 Hz to 12.5 kHz, 1/3 octave)
(pins 1+ & 1-) internally looped to
(1) two terminal barrier strip
Handles: (1) Ergo-Grip™ rear pocket handle
10.4 inches (263 mm)
10.8 inches (275 mm)
Depth:
14.5 inches (367 mm)
Weight: 17 lbs (8 kg)
MX8 and MX10 Owner's Guide — Page 3
MX8
Two-way, full-range 10-inch coaxial
floor monitor, passive crossover
70 Hz to 18 kHz
90 Hz to 16 kHz (+/-4dB)
200W continuous / 500W program
99 dB SPL
(125 Hz to 12.5 kHz. 1/3 octave)
122 dB SPL
8 ohms
100° Conical
(2) Paralleled NL4-type connectors
(pins 1+ & 1-) internally looped to
(1) two terminal barrier strip
(1) Ergo-Grip™ rear pocket handle
24dB/Octave 90 Hz high pass filter
MX-Y10 Yoke mounting wall bracket
10.8 inches (275 mm)
12.6 inches (321 mm)
16.5 inches (419 mm)
22 lbs (10 kg)
29 lbs (14 kg)
MX10