- ページ 5

ドライヤー Bosch Programme TableのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch Programme Table 8 ページ。 Front-loading washing machine
Bosch Programme Table にも： 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 据付・取扱説明書 (32 ページ), 据付・取扱説明書 (32 ページ), 取扱説明書 (10 ページ), 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取付・使用説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (10 ページ), 取扱説明書 (10 ページ), 取扱説明書 (24 ページ), 取扱説明書 (8 ページ), 取扱説明書 (10 ページ), 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (24 ページ), 操作およびインストール手順 (29 ページ), 取扱説明書 (8 ページ), 取扱説明書 (10 ページ), 取扱説明書 (10 ページ), 取扱説明書 (8 ページ)

ページを印刷する
Bosch Programme Table 取扱説明書
Individual settings
Spin speed
depending on model
You can change the indicated spin speed or select Rinse Hold (rinse stop = without final spin
cycle, washing remains in the water after the last rinse cycle). Effects dependent on the
programme progress.
The maximum selectable spin speed depends on the model and the set programme.
Additional functions
Overview of programmes, Page 7
+
Extension of the washing time for a more intensive washing of highly
Eco
soiled washing.
Prewash
For heavily soiled washing. Prewash at 30 °C.
Reduced Ironing Special spin sequence with subsequent fluffing. Gentle final spin
at reduced spin speed. Residual moisture of the washing slightly
increased.
Aqua Plus
Increased water level. Additional rinse cycle. Longer programme
duration. For areas with very soft water or for further improvement
of the rinsing result.
Start/Pause
For starting or interrupting the programme.
Signal
1. Activate setting
mode for signal
volume
set to
* Long signal – function on.
Optional:
Short signal – function off.
Blind mode *
ON–OFF
... Button signals
2. Set volume for ...
+
Eco
+
1 step
select and
1 step
to right
hold
to right
direct
ON–OFF
... Information signals
set volume **
1 step
set volume **
to right
** If required, select repeatedly

Important information

Before using your washing machine for the first time
Do not put any washing in the washing machine! Turn the tap on. Pour into dispenser II:
– approx. 1 litre of water,
– detergent (dosage according to manufacturer's instructions for light soiling and according to
degree of water hardness).
– Set programme selector to
At the end of the programme set the programme selector to Off.
Protecting the washing and the machine
– When dosing all detergents, cleaning aids and cleaning agents, always follow
the manufacturer's instructions.
– Empty pockets. Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, curtains, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.
Insert laundry
Insert large and small items of washing!
Do not jam items of washing between the washing machine door and rubber seal.
Washing with different degrees of soiling
Light
Heavy
Soaking
release
Pour soaking agent/detergent into dispenser II according to the manufacturer's instructions. Set
programme selector to
select
Start/Pause to stop the programme. After the required soaking time reselect
Start/Pause if the programme is to be continued or change the programme.
Starching
Liquid starch can be used in all wash programmes. Pour starch into the fabric softener
set to
dispenser
according to manufacturer's specifications (if required clean beforehand).
Dyeing/Bleaching
Dye in household quantities only. Salt may attack stainless steel! Observe specifications of the
dye manufacturer! Do not bleach washing in the washing machine!
Refreshing
For items of washing which were stored away or not used for a prolonged period, to remove
odours and creases which were caused by folding and storage.
set to
Use finishing agent for a "fresh" fragrance.
Emergency release
The programme continues running when the power supply is restored.
If the washing is still to be removed, the door can be opened as described below:
Risk of scalding!
Detergent solution and washing may be hot. If required, leave to
cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. Set programme selector to Off, pull out the mains plug.
2. Drain the water.
3. Pull down emergency release with a tool and release.
Door can then be opened.
5
Easy-Care 60 °C and select
Wash new items separately.
Do not prewash.
If required, pretreat stains. Select
Load less washing. Prewash.
If required, pretreat stains. Select
Load washing of the same colour.
Cottons 30 °C and select
Start/Pause. After approx. 10 minutes
Washing should not be treated with fabric softener.
Programme
Rinse/Freshen Up.
e.g. if power failure occurs
Page 10
Start/Pause.
+
additional function.
Eco
+
Eco
additional function.
6