- ページ 4

バーナー Anderson FFAH21のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Anderson FFAH21 10 ページ。
Anderson FFAH21 にも：操作マニュアル (8 ページ)

Anderson Thermal Solutions – FFAH21 Burner Operation Manual

ATTENTION：DANGER OF BEEN BURNT

When burner in operation, combustion is severe, so the burner must be fixed. Hoses or cables in area

of the combustion system must be suitable for high temperature, to prevent high temperature failure

or cause safety accidents. Burners should be periodically inspected and cleaned. Copper wire brush

may be used, if necessary, to clean burner head. The burner system should be checked twice a year

for safety operation.

4. Description

FlexFire® air series burner is a patented product of Anderson Thermal Solutions (Suzhou) Co., Ltd. It

is suitable for solid waste incineration, glass melting furnace. FFAH series burner with heated air

temperature up to 700°C and flame temperature is up to 2000°C. t is a high-performance burner with

independent intellectual property rights, utilizing most up-to-date technology for green fuel

combustion, and adjustable mechanism for flame length and energy release position.

The hydrogen/oxygen gases will be supplied through the center of the burner insert gun, with a

mechanical adjustment mechanism can adjust the position inside the burner. Hydrogen and oxygen

will be supplied with premixed with proper ratio, inject in to center of flame, extremely enhanced

the flame temperature, improve the fuel cracking, and thoroughly improve burner radiation heat

efficiency.

Figure 1: FlexFire®-Hot Air Hydrogen Oxygen Burner

Anderson Thermal Soluions（Suzhou）Co., Ltd