ページを印刷する5.1 VFI84 Series Burner Operation Process
VFI84 series of burners are mounted in the exhaust duct and required the exhaust
stream to supply all of the oxygen needed for complete combustion. Because of
character of the process, they are well suited to applications require clean high rate of
destruction of volatile organic compounds, smoke and odors. Do not use choke rings or
other turbulence-inducingdevices in downstream combustion chambers—they may
cause erratic burner performance.
VFI84 series of burners' operation process shown as Fig 1.
5.2 VFI84 Series Burner component's introduction
VFI84 series burner including burner body, gas or oil nozzle, pilot burner, spark rod and
peep sight, etc. It is to be noted that flame monitoring must be provided by an ultraviolet
scanner. Flame rod monitoring is not acceptable. VFI84 series burner schematic diagram
and related components are shown in Figure 2 below.
Anderson Thermal Soluions（Suzhou）Co., Ltd
Anderson Thermal Solutions – VFI84 Burner Operation Manual
Fig 1 VFI84 Series of Burner Operation Process
3