ページを印刷する
6.15
Drum bearings
Removal:
►
Take off the back Panel.
►
Remove work top panel, door, facia panel, front panel and
bearing plate.
►
Bearing plate at the air duct loosen and drum forward remove
►
Take out grounding pin and feather/spring.
►
Remove snap ring and pull off the bearing plate mounting of
the drum axle pull
►
Take out the defect bearings if necessary with a hammer.
113_58300000104082_ara_en_h.doc – 19.03.07
Seite 26 von 30