- ページ 11

シャワーキャビン Dreamline SHEN-1332460 SeriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Dreamline SHEN-1332460 Series 18 ページ。 Quatra lux shower enclosure

ページを印刷する
6.
Locate the Support Bars (#04).
Position the support bar brackets on the panel glass and the wall (at a 45° angle if possible) and level it
horizontally. Hold the bracket firmly to the wall and outline the bracket's position on the wall (Fig. 6.1).
Remove the Support Bar (#04) and detach the wall bracket. Place the wall bracket against its outlined
position on the wall and mark the drilling hole.
Drill the hole using a Ø5/16" drill bit, insert the Wall Anchor (#07) and fasten the wall bracket to the
wall with the Countersunk Screw ST4.2×40 (#17). Attach the Support Bar (#04) to the wall bracket as
shown in Fig. 6.5. Use the supplied gasket to protect the glass surface and tighten the set screws to
secure the glass. (Fig 6)
NOTE: Make sure to use clear rubber
gaskets to prevent glass to metal
contact.
7.
Repeat Step #6 to mount the second Support Bar (#04). (Fig 7)
QUATRA LUX 32x46 34x46 shower enclosure manual Ver 3 Rev 4a 112019
Installation Steps for Support Bar
1
4
5
Fig 7
2
outside
6
Fig 6
TIP:
Vinyl
the return panel glass to
protect the edge during the
installation of the door glass.
3
Ø5/16"
7
90º Strike
Attach the
(#11) to the edge of
return
panel
10