- ページ 3
アクセサリー ANDERSON-NEGELE NSL-F-01のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ANDERSON-NEGELE NSL-F-01 20 ページ。 Continuous level sensor.
sensors for food and biopharma.
ANDERSON-NEGELE NSL-F-01 にも： 取扱説明書 (20 ページ)
ページを印刷するNSL-F Series Operating Manual
Application/intended use
Continuous level monitoring in metallic vessels up to 3m in height
Ideal for highly adhesive and pasty media
Filling level measurement of foamy media
Hygienic use for float sensors
Generally for media with a conductivity of 5 µS/cm or higher (media with a lower conductivity re-
quire individual clarification regarding the tank contour, temperature, assembly, etc.)
Not suitable for explosive areas
Not suitable for safety-related unit parts (SIL)
1
Conformity with standards
The basic safety and health requirements are met through fulfillment of
2014/30/EU Electromagnetic Compatibility
1935/2004/EU Consumer Goods Ordinance
Directive (EU) 10/2011 (articles in contact with food)
EN 61000-6-2:2005 (Interference Immunity)
EN 61000-6-4:2007 + A1:2011 (Interference Emissions)
2
Safety instructions
These safety instructions must be followed to
Avoid endangering persons and the environment
Avoid damage to the sensors
Prevent faulty batches during production
The electrical connections may only be performed by persons with the necessary technical skills (e.g. cer-
tified electricians or persons with technical training in electrics) and by persons with the necessary au-
thorization from the operator.
The power supply and the control circuit inputs and outputs must be properly wired. The current state-of-
the-art of electrical connections must be adhered to. See also section 8 "Wiring diagram".
The following details must be noted in particular:
Safety instructions
Electrical connection data
1.
All persons involved with the setup, commissioning, operation, service and maintenance of the sen-
sor must be suitably qualified.
2.
This operating manual must be followed precisely. The operator must ensure that the personnel has
read and fully understood the operating manual.
3.
All work must be performed with utmost care and may only be performed by authorized and trained
personnel. The regulations effective in the country of use regarding the opening and repair of the
devices must be adhered to.
4.
The operating manual must be stored in the vicinity of the measurement equipment in an easily ac-
cessible location.
5.
The sensor must be de-energized prior to alterations and maintenance.
6.
The working area of the operator must offer enough space to minimize the risk of injury.
7.
The technical data specified in the operating manual and on the type label must be adhered to.
Warranty coverage shall not be granted for any damage that can be attributed to improper execution of
work.
3