- ページ 2

配管製品 Dreamline BUTTERFLY+ENCLOSUREのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Dreamline BUTTERFLY+ENCLOSURE 16 ページ。 Shower enclosure

Preparation
1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed
parts are included in the package by marking all the components on the "Detailed Diagram of
Shower Door Components". Examine boxes and packages for shipping damage. If the unit has
been damaged, has a finishing defect, or is missing parts, please contact our customer support
department within 5 business days of the delivery date. Please note that DreamLine
replace any damaged products or missing parts free of charge after 5 business days or if the
product has been installed. Feel free to contact DreamLine
2. Please note that you should consult your local building codes with questions on installation
compliance standards. Building and plumbing codes may vary by location, and DreamLine is
not responsible for code compliance standards for your project and will not accept any
returns.
3. If this unit is going to be installed in a new construction, please, install all of the required plumbing
and drainage before installing the shower. Use a competent and licensed (if required by local
code) plumber for all plumbing installation period.
4. Prior to installation, please ensure that the installation surface is level and solid and will be able to
support the total weight of the unit. Also, make sure that the walls are plumb. Depending on the
type of unit you are installing, some adjustments in leveling may be possible. However, irregular
installation, surface level or out of square conditions can result in serious problems for your
installation. Please note that some adjustments and drilling may be necessary. Please protect all
primary surfaces of the product during installation. Never set your glass down directly onto a
tile floor. Always use a piece of wood or cardboard to protect the bottom edge and corners of
the glass.
5. Please, NOTE! This door has an out-of-plumb adjustment of up to 3/4" per wall profile.
Caulk
Level
"BUTTERFLY" Enclosure
Rev.1 Ver.3

Tools Required

Tape
Pencil
Measure
Caulk
Gun
if you have any questions.
TM
Drill bit
Phillips
(Ø=5/16") (Ø=1/8")
Screwdriver
Electric
Drill
will not
TM
Drill bit
Hammer
2