- ページ 9

マイクシステム CAROL DW-26のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CAROL DW-26 10 ページ。 2.4g digital wireless microphone system

2.Connect the devices based on the transmitter model purchased.

DW-26C：ø 3.5mm female connector suitable for condenser micro

phones.

DW-26D：XLR female connector suitable for dynamic microphones.

DW-26I ：6.3mm male connector suitable for connecting with musical

instruments."While the transmitter is working, please do not

disconnect it from your device to avoid the pop sound oc-

curred".

3.Hold down for 2 seconds to turn on. When the status LED lights up then it

has been turned on.

Turn Off the System

1.Hold down the receiver power button for 3 seconds. Once the status

LED goes out then the device has been turned off.

2.Hold down the transmitter power button for 3 seconds. Once the

status LED goes out then the device has been turned off.

Changing the Transmitter's Battery

1. When the transmitter is on and the status LED turns red, this means

battery is low and needs to be replaced.

2. Open the DW-26 digital wireless transmitter 's battery cover and

insert two AAA batteries in the indicated direction.

3. Replace the battery cover.

Pairing (FOR TECHNICIAN USE ONLY)

When the receiver and transmitter are both turned on, pairing will generally

happen automatically. If automatic pairing fails then please follow the steps

below to complete the pairing process.

1. Turn on the DW-26 receiver and hold down the Transmitter 1 (or Transmit-

ter2) Pairing Button. The corresponding status LED will start blinking.

2. Hold down the RESET button on the DW-26 transmitter. The transmitter's

status LED will start blinking.

RESET button

3. When the Transmitter 1 (or Transmitter 2) Pairing Buttons andtransmitter

status LEDs are both blinking, it indicates the auto pairing is activated by

the program. The pairing process takes about 10-20 seconds. Once pairing

is complete then LED lights on the paired products will glow continuously.

4. If the pairing process failed, please repeat 5.5.1-5.5.2, and speed up the

process.