- ページ 7

クックトップ ANDI ACIF682のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ANDI ACIF682 13 ページ。 Induction hotplate

Instructions for Use

Preparation before using:

After power on, the buzzer beep once, all the indicators

light up for 1 second then go out, indicating the induction

hotplate enters the state of standby.

Put the pot in the center of the heating zone.

Operation Instructions

After the "ON/OFF" key is pressed, all the indicators show

"-". According to the heating zone where the pot is placed,

select a relevant zone selection, with a corresponding

power level indicator flashing. At the moment, press the

"+" or "-" button, the indicator displays 5, then adjust the

power levels using the"+" or"-" button. Press the "+" and

"-" buttton simultaneously, the hotplate immediately returns

the power setting to 0 and all the cooking zone switches

off.

See the attached table on PAGE 8 for the power specific

to each heating zone.

Note: After the "ON/OFF" key is pressed, the induction

hotplate will restore to its standby state if no any operation

is carried out within 1 minute.

Boost function

To get a quicker heating speed, directly press "BOOST"

after selecting the heating zone, with the power level indicator

showing "P. " This function can reach the heating power of

up to 2800W.

Note:

1. The boost function only operates for 5 minutes, after

which the cooking zone returns to its orginal setting.

2. The boost function only works on the third cooking zone.

3. As the boost function is activated ,the 4th cooking zone

is limited under level 2 automatically.