- ページ 6

室内装飾品 DREAMS Amelia BedのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。DREAMS Amelia Bed 8 ページ。

ASSEMBLY

Construct the slat frame as follows:

1) Bolt head/foot bars 10 to the

centre bar 12 using screws G,

washers C and nuts P as shown.

2) Secure the side bars 11 by

threading screws G into the

corresponding holes in the

head/foot bars 10. tighten, using

Allen key S.

1) Fit the mattress support rails V

the slat frame. Secure with

screws H and nuts O. Tighten

with a spanner.

2) Fit the slats to the slat frame by:

a)Pushing the end caps into the

holes in both side bars 11.

b) One by one, slot each slat into

the end caps at either side first.

c) Slot a slat from each side into

a centre cap.

d) Finally, carefully push the centre

cap, with both slats fitted into the

holes in the centre bar.

STEP 5

STEP 6

6 of 8