ページを印刷する• If we are to place the door lock underneath the detergent dispenser we
have to mount a door lock protecting part, part number YA2805290100
on the terminals of the door lock secured with a screw. In the other case
the door lock protecting partshould be removed (Figure 1b).
-Fix the door lock on the front panel with two screws.
-Place and slide upwards the front panel on the cabinet. Secure it with three screws.
-Dismount the hinge plugs and mount them on the other side.
-Screw hinge support bracket on the front panel.
-Unscrew the two PT screws securing the door hook cover. And detach door hook
cover from the front door.
-Turn the glass with hands 180º so that the gap at the peripheral of the door glass
can be seen from the opening of door hook cover hole.
-Place the door hook cover in its place so that its protrusion locks the gap of the door
glass. Secure it to the front door with two PT screws.
-Shove the tongue of the hinge inside the T hole on the hinge support bracket.
-Fix the front door to the front panel with two bolts from the two holes on the hinge.
-Insert cabinet hood clamp in its place and fix it to the front panel.
4- INNER COVER AND FRONT DOOR GLASS
• Remove the front door.
• Inner cover is disassembled by the aid of a flat screw driver end at the side
of the hinge connection of the inner cover.
• Remove the front door glass after removing the inner cover.
4a- INNER COVER, OUTER COVER, FRONT DOOR GLASS and the HINGE, (New
BIG DOOR)
-Take out the cabinet hood clamp and detach the door hood from the front panel.
-Unscrew the hinge bolts (M5x10) and detach tha front door from the front panel.
-Unscrew the screw fixing the hinge support bracket.
-Unscrew the 9 plastic screws on the front door.
-Take out the door hook cover and the hook group (hook, hook pin and the hook
spring).
Figure 1b