- ページ 5

室内装飾品 DREAMS San Diego TV BedsteadのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。DREAMS San Diego TV Bedstead 6 ページ。

Help Guide

We hope you will be very happy with your TV Bedstead but please read these points carefully; they will help

you assemble the bed and media successfully:

IMPORTANT: BEFORE FITTING THE MATTRESS... Please do the following

1) In the compartment of the footboard (with red label), open the lid and carefully remove the long accessory

box and ALL transit material. Please dispose of this material in a safe environmentally friendly fashion.

2) The box contains the following:

a. HARDWARE KIT TO ASSEMBLE THE BED

b. MAINS POWER LEAD – 3 MT LONG

c. AERIAL LEAD – 3 MT LONG

d. TV REMOTE CONTROL

e. TV OPERATION GUIDE

f . TV LIFT REMOTE SWITCH

3) If you want to keep the accessory box, do NOT return it to the transit position as it could damage working

parts.

4) Keep children & other adults well clear of the foot end of the bed, when operating the TV Lift Switch.

5) In the centre of the footboard, under the bed, is a compartment containing a connection box for mains

power input plug which is on the end of the 3Mt lead, aerial connection and x2 HDMI connections.

a. Plug the power and aerial cables into the sockets and other end into the wall sockets.

b. Plug your media into one or both of the HDMI sockets as appropriate.

6) Check that power is available and test the TV Lift – just press UP button.

7) Check TV works and is switched ON – switch is underneath TV, on right hand side.

8) Switch on TV and refer to TV Operation Guide to set up TV.

9) To lower TV, press DOWN button on TV Lift Switch – power to the TV will shut off when the TV reaches the

bottom of the stroke - lid will close automatically..

10) To raise TV, press UP switch and TV will rise to the TOP and power will be restored then TV Lift will stop

automatically at the top of it's travel.

Now it is time to fit the mattress...

IMPORTANT: SOMETIMES YOU NEED TO PRESS THE SWITCH TWICE IF YOU GO UP/DOWN or DOWN/UP

QUICKLY, THIS IS NORMAL AND IS NOTHING TO BE CONCERNED ABOUT. IN NORMAL OPERATION

WHEN LIFT IS UP or DOWN FOR MORE THAN 5 MINS, PRESSING ONCE IS SUFFICIENT.

If you have any problems, refer to troubleshooting guide on the next page..

Page

5 of 6