- ページ 3
プロジェクター DREAMVISION DreamWeaver IIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DREAMVISION DreamWeaver II 13 ページ。 Digital cinema projector
ページを印刷するModification of the Page 5 of the user's Guide
Positioning the projector
There are a number a factors to consider when determining where to set up
the projector, including the size and shape of your screen, the location of
your power outlets, and the distance between the projector and the rest of
your equipment. Here are some general guidelines.
1
Position the projector on a flat surface at a right angle to the screen.
The projector must be within 10 feet (3 m) of your power source. To
ensure adequate cable access, place the projector at least 6 inches
(0.15m) from a wall or other objects. Place the projector at least 5.6 feet
(1.7 m) from the projection screen.
If you install the projector on the ceiling, refer to the installation guide
that comes with the Ceiling Mount Kit for more information. To turn
the image upside down, see page 14. DreamVision recommends use of
an authorized DreamVision ceiling mount. The Ceiling Mount Kit is
sold separately, see page 11.
2
Position the projector the desired distance from the screen.
The distance from the lens of the projector to the screen, the zoom set-
ting, and the video format determine the size of the projected image.
For more information about projected image sizes, see page 12.
The image exits the projector at a given angle. This image offset is 133%.
This means that if you have an image 10' high, the bottom of the image will
be 3.3' above the center of the lens.
Check Page 34 for further help.
10' high
image
bottom of image
3.3' above lens
lens center
3