- ページ 12
プロジェクター DREAMVISION T9006000のPDF 組み立てと校正をオンラインで閲覧またはダウンロードできます。DREAMVISION T9006000 16 ページ。 Theatre system kit for inti
ページを印刷する3.0 PROJECTOR-SIDE CONFIGURATION
X on/off
Flow Control
Command Format
When sending a command to this unit, use the following data format:
Header
1 byte
Header
Unit ID
Command
Data
EoD
Available Lengths and Commands (not exhaustive)
Header (21h)
Power ON
Power OFF
Switch input
Hide Display
Test Pattern
Picture Mode
Anamorphic Modes
Aspect Ratio
12
None
None
Unit ID
Command
89h 01h
2 bytes
(21h): Operating command. PC -> Projector
(3Fh): Reference command. PC -> Projector
(40h): Response command. Projector -> PC
(06h): ACK. Projector -> PC
Fixed to (89 h 01h)
2 bytes. See the list of the available commands below.
If Command code is "52h 43h", the Data sent may also be sent to the
projector by a programmable RCU using NEC 5 protocole.
1 to 4 bytes. See the list of the available data for each command below.
Fixed to (0Ah)
Command
Data
52h 43h
37h 33h 30h 35h
52h 43h
37h 33h 30h 36h
52h 43h
37h 33h 30h 38h
37h 33h 34h 36h
37h 33h 34h 44h
37h 33h 37h 30h
37h 33h 37h 31h
52h 43h
37h 33h 31h 44h
52h 43h
37h 33h 35h 39h
52h 43h
37h 33h 36h 36h
37h 33h 36h 37h
37h 33h 36h 38h
37h 33h 36h 39h
37h 33h 36h 41h
37h 33h 36h 42h
37h 33h 38h 37h
37h 33h 36h 43h
37h 33h 36h 44h
37h 33h 36h 45h
37h 33h 36h 46h
52h 43h
37h 33h 32h 34h
37h 33h 32h 33h
37h 33h 32h 42h
37h 33h 43h 35h
52h 43h
37h 33h 37h 37h
37h 33h 32h 35h
37h 33h 32h 36h
37h 33h 32h 37h
Data
at least 1 byte
Description
Switch the unit ON.
Switch this unit into Stand-by mode.
Switch to next input
Switch active input to VGA (Inti 2 & 3 only)
Switch active input to Component
Switch active input to HDMI 1
Switch active input to HDMI 2
Hide the projected picture at the screen.
Switch Test Patterns on the screen.
Animation Mode
Stage
Cinema Mode
Film Mode
Natural
Dynamic
3D
User 1
User 2
User 3
THX (Inti 2 & 3 only)
Turn OFF the Anamorphic mode
Anamorphic set to Mode A
Anamorphic set to Mode B
Cycle Anamorphic Mode through OFF/A/B
Toggle Aspect Ratio.
Set Aspect Ratio to 4:3
Set Aspect Ratio to 16:9
Set Aspect Ratio to Zoom.
R699802 - THEATER System Kit for Inti
EoD
0Ah