- ページ 7

ドリル Bosch 11250VSRDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch 11250VSRD 45 ページ。 Operating instructions
Bosch 11250VSRD にも：取扱説明書 (44 ページ), 取扱説明書 (49 ページ)

ページを印刷する

1. Operating Instructions

BM 1619P02168 12-07

Disconnect the plug from

WARNING

the power source before

making any assembly, adjustments or

changing accessories. Such preventive

safety measures reduce the risk of starting the

tool accidentally.

INSTALLING SDS-plus

Clean the insert shank end of the accessory to

remove any debris, then lightly grease with a

light oil or lubricant

Insert accessory into the chuck through the

dust shield, while twisting and pushing inward

until it locks automatically into place. Pull

outward on the accessory to be certain it is

locked into the chuck (Fig. 2).

FIG. 2

SDS-plus

CHUCK

DUST

SHIELD

OFFSET AUXILIARY HANDLE

The tool must be supported with the auxiliary

handle, which can be swiveled 360˚.

To reposition and/or swivel the handle, loosen

the hand grip, move the handle to the desired

position along the barrel and securely retighten

the hand grip (Fig. 4).

12/5/07

3:52 PM

Assembly

ACCESSORIES

Page 7

NOTE: The high efficiency available from the

rotary hammers can only be obtained if sharp

and undamaged accessories are used. The

"cost" to maintain sharp and undamaged

accessories is more than offset by the "time

saved" in operating the tool with sharp

accessories.

REMOVING SDS-plus

Accessories may be hot after

WARNING

use. Avoid contact with skin

and use proper protective gloves or cloth to

remove.

To remove an accessory, pull locking sleeve

backward and pull bit forward. All accessories

should be wiped clean after removing (Fig. 3).

FIG. 3

LOCKING

SLEEVE

FIG. 4

-7-

ACCESSORIES

HAND GRIP