メディア・コンバーター Comnet CNFE2MCPOEMのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Comnet CNFE2MCPOEM 6 ページ。 10/100 mbps 2 port media converter with power over ethernet
ページを印刷する
INSTALLATION AND OPERATION MANUAL
CNFE2MCPOE[/M]
10/100 MBPS 2 PORT MEDIA CONVERTER
WITH POWER OVER ETHERNET
The ComNet™ CNFE2MCPOE Ethernet 2 port media converter is designed to
transmit and receive 10/100 Mbps data over optical fiber through user selectable
SFP modules. These models require the ordering of sold-separately interchangeable
SFP modules for fiber type, distance and connectors.
The CNFE2MCPOE transmits and receives a single channel of Ethernet data. It also
supports IEEE 802.3at as Power Sourcing Equipment (PSE) with up to 30 Watts
output, both Mode A or Mode B are supported. The electrical interface will Auto-
Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments.
The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally
hardened to operate in extreme conditions.
LED indicators are provided for confirming equipment operating status. See Figure
5 on Page 4 for LED indicator descriptions.
See Figures 1 – 7 for complete installation details.
The CNFE2MCPOE operates as a standalone module. It can also be mounted in a
ComNet Rack, but PoE operation is not supported in this application. See Page 6 for
mounting instructions.
INS_CNFE2MCPOE[/M]_REV–
07/28/10
PAGE 1