- ページ 15
冷凍庫 Electrolux TRIMKITSS2のPDF プランニング・マニュアルをオンラインで閲覧またはダウンロードできます。Electrolux TRIMKITSS2 20 ページ。 Built-in trim kits
Electrolux TRIMKITSS2 にも： インストレーション・マニュアル (9 ページ)
ページを印刷する
- 1. Table of Contents
- 1. Signature Styling
- 1. All Freezer & All Refrigerator (EI32AF65JS & EI32AR65JS)
- 1. All Freezer & All Refrigerator (E32AF75JPS & E32AR75JPS)
- 2. Planning Information
- 2. Compatibility Table
- 2. Trim Kit Compatibility
- 2. Louvered Trim Kits (ECP8436SS & ECP8472SS)
- 2. Collar Trim Kits (ECP7236SS & ECP7272SS)
- 2. Installation Specifications
- 2. Louvered / Collar Trim Kits (TRIMKITSS1 & TRIMKITSS2)
- 2. Louvered Trim Kit (241723001)
- 2. Collar Kit (ECK23CDS)
- 2. Louvered Trim Kit
- 2. Collar Kit (ECK23CDS)
- 2. General Installation Guidelines
Planning Information
For new-build installation when installed with Counter-Depth Side-by-Side Refrigerator
models E23CS78HPS and E23CS78HSS
Installation Specifications
New-Build Installation – Collar Kit (PN # ECK23CDS) is designed for
built-in installation with Counter-Depth Side-by-Side Refrigerator models
E23CS78HPS and E23CS78HSS.
To use Collar Kit (PN # ECK23CDS), an enclosure is required around
Counter-Depth Side-by-Side Refrigerator having an opening of 70-1/4" H x
36-1/8" W with minimum cabinet side panels of 24-1/2" D x 1/2" W.
Minimum 24-1/2" depth requires recessed electrical outlet and water line.
Add maximum of 1/4" to 70-1/4" opening height when installed with
frameless-style overhead cabinets, for door opening clearance.
Cabinet or soffit above unit must extend out to same depth as side panels.
To provide additional clearance for overhead cabinet doors when in open
position, allow 1" from underside of cabinet to bottom of cabinet door.
A minimum width of 36-1/8" is required for refrigerator install ation with
an additional 1/2" or 3/4" added for each side panel.
If 1/2" side panels are used, then side trim piece and panel will be even.
If 3/4" side panels are used, then 1/4" of side panel will extend beyond
collar trim and must be finished.
For detailed Collar Kit installation, refer to instructions packed with kit or on web.
For detailed Counter-Depth Side-by-Side Refrigerator installation, refer
to model-specific product page and installation guide on web.
Collar Kit (PN # ECK23CDS) can also be used with Counter-Depth Side-by-
Side Refrigerator models E23CS75DSS, E23CS78EPS, E23CS78ESS,
E23CS78GPS and E23CS78GSS.
Note:
For planning purposes only. Refer to product information
on the web at electroluxicon.com for detailed installation instructions.
Specifications subject to change.
Collar Kit
(ECK23CDS)
15