- ページ 5
冷凍庫 Electrolux ZANUSSI ZF 54 SIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux ZANUSSI ZF 54 SI 16 ページ。
ページを印刷する
OPERATION
Before use
Remove all securing tapes. Wash inside the appliance
with lukewarm water and bicarbonate of soda (5 ml to
0.5 litre of water). Do not use soap or detergent as the
smell may linger. Dry thoroughly.
Freezer controls
Pilot light (green)
Thermostat control knob
Fast-freezing indicator light (yellow)
Starting your appliance
Insert the plug into the wall socket. The appliance can
be activated by turning the thermostat knob
beyond the "-16°C" position. When the pilot light
illuminated this shows that the appliance is on.
Freezer operation can be halted by turning knob
to position « ».
Temperature control
The temperature inside the freezer is regulated by a
thermostat with 5 temperature positions and one
«OFF» ( ) position.
Position «-16°C» = minimum cold
Position «-24°C» = maximum cold
Turn the thermostat dial to the required position.
An intermediate position (-18°C) is usually the most
suitable, although the temperature will be affected by:
Room temperature
l
How often the door is opened
l
How much food is stored
l
Position of the appliance
l
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
To obtain a lower temperature, turn the thermostat
control to the higher numbers; to obtain a higher
°C
-16
-24
-18
-22
-20
is
5
Push button for fast-freezing
Warning light (red)
temperature turn the control to the lower numbers.
When altering the temperature setting, allow 24 hours
for the temperature to stablise before making further
changes.
Warning light (red)
If the temperature warning light
indicates that the temperature within the freezer has
reached a level where safe food storage is no longer
ensured (warmer than -12°C).
When the freezer is first switched on, the warning
light will stay on until the temperature has dropped to
a safe level for the storage of frozen food.
lights up, it