- ページ 2

トランシーバー Comnet FDX54のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Comnet FDX54 4 ページ。

INSTALLATION INSTRUCTIONS

LEDS:

RED = "No Activity"

GRN = "Activity"

NOTE:

RED DOES NOT MEAN "Error"

WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.

WARNING: This unit should be installed in a restricted access location; available through the use of a lock and key or other

means of security. Access should be limited to service personnel who have been instructed about the reasons for the restrictions

to the location. Any and all precautions should be taken and controlled by the authority responsible for the location.

IMPORTANT SAFEGUARDS:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,

the operating ambient temperature of the rack environment may be greater than room ambient.

Therefore, consideration should be given to installing the equipment in an environment compatible with

the maximum ambient temperature (Tma) specified by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow

required for safe operation of the equipment is not compromised.

1 FIBER IN/1 FIBER OUT RS485 2/4 WIRE

MULTIMODE OR SINGLE MODE OPTICAL FIBER

DATA REPEATER

BLACK WITH WHITE STRIPE

BLACK

NOTE: Remove Electrical Connector

for Rack Mount Units

FDX54

INS_FDX54_REVA

03/06/09

Page 2