- ページ 4

産業機器 Andisoon Measure T635 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Andisoon Measure T635 Series 10 ページ。 Hydrogen refueling nozzle

ページを印刷する

II. Technical Parameters

Table of Technical Parameters of Hydrogen Refueling Nozzle

Working medium

Medium temperature

Ambient temperature

Relative air humidity

Rated working

pressure

Nominal diameter

Air inlet size

Explosion proof mark

IP rating

III. Product Installation

Installation Procedure

Open the packing

case and take out the

hydrogen refueling

nozzle

Complete

hydrogen

refueling

nozzle

installation

Installation Method

1、 Remove the hydrogen refueling nozzle from the packing case in a dry

and safe environment;

2、 Rotate the hose sheath to separate the sheath from the main body of

the hydrogen refueling nozzle;

3、 The inlet connector of hydrogen refueling hose and the power cable

connector of infrared communication module are threaded in from the

big blue end of hose sheath and out from the small natural color end of

aluminum alloy;

4、 Wipe the sealing surface of the inlet connector of the

-40℃～＋85℃

-40 ℃～＋60 ℃

≤95 ％

70MPa

DN4

9/16"-18 UNF

Ex ia IIC T4 Gb

IP65

Wipe

the

sealing

surface of joint with

dustless cloth

Check

the

air

tightness at joint and

overall part

Connect the hose to the

hydrogen

refueling

nozzle with a wrench

Close the vent valve in the

hydrogen dispenser

hydrogen