- ページ 8

ホブ Electrolux EHD60100PのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EHD60100P 12 ページ。 Ceramic glass induction hob
Electrolux EHD60100P にも：仕様 (18 ページ)

ページを印刷する

8 electrolux

You can use the timer as a minute minder

while cooking zones do not operate. Touch

. Touch

the time elapses, the sound operates and

flashes

Starting the STOP+GO

The

function sets all cooking zones that

operate to a keep warm setting.

• Touch

to start this function. The sym-

bol

comes on.

• Touch

to stop this function. The heat

setting that you set before comes on.

does not stop the timer function.

fully locks the control panel but not the

sensor field

Locking / unlocking the control panel

You can lock the control panel, but not

It prevents an accidental change of the heat

setting during a cooking session.

Touch the symbol

on for 4 seconds.

The Timer still operates.

Touch the symbol

tion. The heat setting that you set before

comes on.

When you switch off the appliance, you also

switch off this function.

Helpful hints and tips

Cookware

• The bottom of the cookware must be

as thick and flat as possible.

• Cookware made of enamelled steel

and with aluminium or copper bot-

toms can cause discoloration on glass

ceramic surface.

Cookware for induction cooking zones

Important! In induction cooking a powerful

electromagnetic field generates an almost

instant heat inside the cookware.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, a multi-layer bottom

(marked as correct by a manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

to select the time. When

. The symbol

comes

to switch off this func-

The child safety device

This function prevents an accidental opera-

tion of the hob.

Starting the child safety device

• Start the hob with

heat settings .

• Touch

until the acoustic signal. . The

symbol

comes on. Switch off the ap-

pliance.

Switching off the child safety device

• Start the hob with

Touch

until the acoustic signal.

comes on

• Switch off the appliance.

Overriding the child safety device for one

cooking session

• Start the hob with

comes on.

• Touch

until the acoustic signal. The

symbol

comes on. Set the heat set-

ting in less than 10 seconds. You can

operate the hob. When you stop the hob

with

, the child safety device operates

again.

Cookware is correct for an induction hob if

...

• ... some water boils very quickly on a zone

set to the highest heat setting..

• ... a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware must be

as thick and flat as possible.

Cookware dimensions : induction

cooking zones adapt to the dimension of

the bottom of the cookware automati-

cally to some limit. But, the magnetic

part of the bottom of the cookware must

have a minimum diameter of approxi-

mately 3/4 of the cooking zones.

Operating noises

If you can hear

• cracking noise: cookware is made of dif-

ferent materials (Sandwich construction).

. Do not set the

comes on.

. The symbol