室内装飾品 Alera ALE-SS600のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Alera ALE-SS600 2 ページ。 Sit/stand series, adjustable height stool

Read these instructions before starting; follow assembly

procedures carefully.

1. Base base

right-side up on a flat surface or workbench.

Insert support column 2 into groove at base. Bumper

stops must be towards rear of sit stand. Align the holes in

support column with holes in base. Insert bolts (4.4) from

outside and fasten down from inside with fiber hex nuts

(4.5) to secure base. Slide shrouds down column to cover

top of base. Shroud should be positioned over hex nuts.

2. Place base on the floor. Slide seat assembly 3 onto

support column. Push down front of seat to lock seat

position.

1 PC.

STEP 1

Slide shrouds down to cover

hex nuts and top of base.

STEP 3

ASSEMBLY INSTRUCTIONS

3. Mount handle (4.3) to back of seat assembly. Align holes

4. Grooves in top of right and left sleeves (4.1) should be

PARTS LIST

1 PC.

Parts bag components

ASSEMBLY

STEP 2

STEP 4

in handle with holes in back of seat assembly. Secure

handle with two screws (4.6).

aligned with tabs of handle cover (4.2). Be sure the seat is

facing the correct direction before inserting the handle and

handle cover.

WARNING: It is important the tabs in handle engage in

column to ensure that handle locks in place.

Insert handle, handle cover and sleeves (4.2) onto top of

support column. Tap handle into place.

4.2

4.1

Sit/Stand Series

Adjustable height stool

ALE-SS600

4.3

4.6

4.5

4.4

Stool assembled