- ページ 10

顕微鏡 Andonstar ADSM302のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Andonstar ADSM302 19 ページ。

Tip: Press "Lock&unlock" on the remote to lock the file when it's recording. So the video file won't be covered by

new files when the memory card is full.

◆ HDMI

Connect the microscope to the HDMI monitor, then connect the power supply. Turn on the microscope and

adjust the distance. Then put the object on the table and adjust the focus controller.

Please note: The ADSM302 internal screen won't show an image when the device is connected via HDMI. You

still can take pictures and save them if you have a memory card inside the microscope, but you can't record

videos in this output mode.

•Why is there no image on the monitor ?

Please check all the cables connect properly and also make sure the device is switched on.

•Why the image is not clear ?

Please adjust the object distance and the focus controller, check the direction of the LED lights, and make sure

the lens is clean enough.

•Remote doesn't work ?

There is no battery inside of the remote as standard configuration. Please check if there is battery in the remote.

Download the software first. Then open the zip file and run the setup.

http://www.andonstar.com/e_news/soft-2.html

So far the measuring software "Andonstar" can only support Windows system. If you can't open the links or get

problem with downloading these files, please ask customer service to send you separately. You can also go visit

our website and download from there.

System Requirements:

•

Windows XP SP3 / Vista / 7 / 8 / 10

•

Microsoft.Net Framework 4.0

•

Microsoft Visual C++ 2010 Runtime

If there isn't either of the runtimes above mentioned, there would be mistake during installation.

Andonstar ADSM302 Digital Microscope

- 8 -