ターンテーブル andover SpinbaseのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。andover Spinbase 2 ページ。
andover Spinbase にも：製品マニュアル (12 ページ)

Spinbase Setup

1. Remove Spinbase from its box. Keep the

packaging for returns or exchanges.

2. Place Spinbase on a level surface. This is

important for your turntable performance.

3. Before turning it on, plug Spinbase into a

power outlet using its power adapter.

Connect a Turntable or Record Player

1. Place your turntable on top of Spinbase.

2. Using a turntable with a Magnetic cartridge

(most common): Connect your turntable to

"Magnetic Phono". Ensure switch is set to

"Line-In".

3. Using a turntable with a Ceramic cartridge,

or a record player with a line output:

Connect it to the Line-In on Spinbase. Set

switch to "Ceramic".

4. Use the ground connector if your turntable

supports it.

5. Leave shorting plugs in the "Magnetic

Phono" input when it's not being used.

Connect a Bluetooth Device

1. Connect to "Spinbase" in your Bluetooth settings.

2. Disconnect Bluetooth for another device to pair.

Notice:

Some users may experience an unpleasant noise when powering Spinbase on/

off while their headphones plugged in. Please be aware.

Two Year Warranty

Andover Audio warrants Spinbase against manufacturing defects and workmanship to the initial purchaser

for a period of one (1) year from the date of delivery to customer. Andover Audio will repair or replace the

unit as necessary to restore proper operation. This warranty covers both parts and labor for the warranty

period. The warranty excludes physical damage caused by accident or abuse outside of our control. If you

think you need warranty service, please contact us to obtain an RMA (Return Merchandise Authorization) by

emailing [email protected] or calling 978.775.3670. Please visit our website's support section

for more information about returns and exchanges.

Quick Setup Guide (Version 8)

Visit our website's support section for the latest product manuals.