- ページ 8

ターンテーブル andover SPINDECKのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。andover SPINDECK 12 ページ。 Belt-drive turntable
andover SPINDECK にも：製品マニュアル (16 ページ)

ページを印刷する

Technical Specifications

Spindeck MAX

Nominal speeds

Wow and flutter

Signal to noise

Effective tonearm length

Overhang

Signal cable capacitance

Power consumption

Power adapter

Dimensions (W x H x D)

Ortofon OM10 phono cartridge

Frequency range

Channel separation

Output voltage

Recommended load impedance

Compliance/stylus type

Recommended tracking force

Weight

Replacement Stylus

Cartridge replacement

Your Spindeck MAX is engineered to be simple, easy to use, and requires no adjustment.

In the unlikely event that phono cartridge replacement becomes necessary, we

recommend replacement with a similar Ortofon OM series cartridge, as tracking force

adjustment is not possible.

If a model from the recommended OM series is unavailable, we suggest a cartridge

with a weight of 5 grams, and a recommended tracking force of between 1.25g and 2g.

Any additional cartridge weight above 5 grams will be added to the tracking force. For

example, if the new cartridge weighs 5.5g, the effective tracking force will increase by

0.5g.

If any changes are made, a stylus force gauge, available from many sources, should be

used to confirm that the actual tracking force is within the range recommended by the

cartridge manufacturer.

33.33/45 r.p.m.

<0.04% RMS

-65dB Weighted

211mm

19.5 mm

160pF

12V DC / 1.5W

Suitable for USA/Canada

420 x 119 x 360 mm (WxHxD)

20-20,000Hz

22dB/1kHz

4.0mV

47kohms/200-600pF – MM-input

20µm/mN – Elliptical

1.25 - 1.75g

Stylus 10

Page 8