- ページ 2

電動工具 Compac CSC+のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Compac CSC+ 4 ページ。 Air operated spring press

Installation:

Mount feet and wheel holder bars. See position 13, 14 and 20 on the spare parts drawing. Place

pos. 20 between the frame and pos. 13. Place pos. 20 between the frame and pos. 14. The wheels

should point towards the rear of the press.

Connect air hose to the press.

Ensure that the air pressure is between 8 – 13 bar (116 – 188 psi) and that the airflow is minimum

225 litres per minute.

Never use air pressure of more than 13 bar (188 psi)!

Operate the press without any load to its maximum stroke and return. Check for any malfunction or

air leaks.

Operating instruction:

How to operate the pump:

1. Step on the LEFT side of the foot operation to move the swivel jaws DOWNWARDS.

2. Step on the RIGHT side of the foot operation to move the swivel jaws UPWARDS.

How to operate the press to compress and decompress a McPherson spring:

1. Select the correct spring holder and place it in the three holes in the front of the table.

Ensure that the bolts grab firmly in both holes.

2. Place the McPherson spring system in the spring holder.

3. Move the swivel jaws to the correct height and place

4. WARNING: Always use both jaws simultaneously and ensure that the safety lip on

jaws are grabbing firmly around the coils before activating the press.

5. Once spring system is mounted correctly then activate the press to compress the spring.

6. Once the spring is compressed to the required height stop activating the press.

7. Once the job is done simply press the RIGHT side on the foot operation to decompress the

spring system.

Alternatively if you choose to use the vise to clamp the strut, make absolutely certain that it is firmly

clamped to the strut.

BOTH

jaws on the coils.

BOTH