ページを印刷する
ASSEMBLING
YOUR TOWER FAN
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
1
Slots
Up
Down
Pegs
2
Press down on edges to click two
base halves together.
3
Fan
Dreo Tower
2
Keep two base halves in a
crossed position, then insert
pegs on one half onto the
slots on the other half.
3
Jutting Points
Fit the base onto the bottom of
the fan by aligning the arrows
on the underside. Make sure the
jutting points in the center of the
base are fitted into the recesses
on the fan.
4
Rotate the base clockwise to
lock in place.
5
Put the fan upright, then plug
the power adapter into the
power input (located at the back
of the fan), and into the power
outlet.
CAUTION
Do not operate the tower
fan if the base has not
been installed.
Fan
Dreo Tower
4