- ページ 5

バッテリーチャージャー Andres Industries aiRack-10のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Andres Industries aiRack-10 7 ページ。

Delivery

1x aiRack-10

1x power cable (type B, C, G or J)

1x allen key (key width: 2,5 mm)

20x cylinder head screw M3x6 (ISO 4762/DIN 912)

20x toothed lock washer 3,2 (DIN6797)

Pre-commisioning

1. Put an iPad into the propper aiShell.

(according aiShell-instruction-manual)

2. Open the lower rubber plug to get access

to the loading port.

3. Insert the Connector (after checking the

o-ring) in the lower opening of the aiShell.

4. Place one toothed lock washer (enclosed

with the aiRack) in each screw hole of the

Connector.

5. Screw the Connector to the aiShell with the

enclosed cylinder head screws.

Attention

Before the iPad can be removed from the aiShell the Connector HAS

TO BE removed. Afterwards for the removal of the iPad follow the steps

described in the aiShell manual vice versa.

If you try to remove the iPad with the Connector attached to the aiShell

the Connector will be damaged!