- ページ 12
ヒーター Atlantic Olympe VentiloのPDF ユーザー・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Atlantic Olympe Ventilo 14 ページ。 Programmable electronic towel-drying
ページを印刷する- Prevent children from climbing on the device.
- Any intervention on the electrical parts must be performed by skilled staff.
- Do not insert objects or paper in the device.
- Upon first warming, a slight smell may appear, due to the evacuation of compounds used during the devi-
ce's manufacturing.
- The casing may be hot, even when the device is off.
- To maintain the performance of the device, about twice per year, clear the dust.
Do not use abrasive products.
- For models with a fan, use a vacuum cleaner to clear the air inlet and outlet grids, as well as the filter
(refer to the Filter paragraph).
- Every five years, have the machine's interior checked and cleaned by a professional.
Problem
The device does not heat
The heating device
heats constantly
The appliance does not follow
the programming instructions.
The fan stops prematurely
W
ARNING
M
AINTENANCE
I
N CASE OF PROBLEM
- Check that the premise circuit breakers are triggered or that the
shedder (if you have one) has not interrupted the device's power sup-
ply.
- Check the air temperature in the room.
- Switch the device off, then back on (
If the
indicator blinks 3 times: the measurement probe is
damaged. Call your electrician to ensure its replacement.
If the
indicator blinks 5 times: power surge in device supply.
Power off the device (fuse, circuit breaker...), and call your elec-
trician.
- Check that the device is not located in a draft or that the temperatu-
re setting has not been altered.
- Ensure that you use the programming unit correctly (refer to the
instructions manual), that the programmer is correctly lodged in its
housing and that it is operating normally (check the condition of the
batteries).
- Check that the air inlet grills are not blocked. Proceed to clean
them if necessary (refer to the Filter paragraph).
- Check that the room temperature has not reached too high a level. In
this case, fan stoppage is normal. Just wait for the ambient temperatu-
re to drop before reusing the Turbo mode.
- If you live at an altitude of more than 1000m, because the air is less
dense this may cause the item to rise in temperature more quickly.
This may therefore become a repetitive problem (without having any
major effect on the service life of the machine's components).
In all cases, follow the procedure below to restart the machine:
Switch off the machine (switch
Wait at least 10 minutes
Restart the machine (switch
Check
switch):
).
).