- ページ 32

換気フード Electrolux 922722のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Electrolux 922722 32 ページ。 Built-in hood for electric oven
Electrolux 922722 にも：ユーザーマニュアル (24 ページ)

ページを印刷する

AL03 IM_HO_L4

Plug the newly disconnected pipe using a clamp or

screw (check that the other end of the pipe is still

connected to the steel pipe welded in place 3)

Use the new supply blue pipe to connect the solenoid

valve (black sticker, first one near the threaded inlet)

to position 4 of the vapour exhaust pipe. Cut it to the

correct and "comfortable" length. Use the new screw

clamp to lock the hose in place.

Change Software parameters following documents:

"AL01 IM_HO_01_02_03_04" for Touch Oven

"AL02 IM_HO_01_02_03_04" for Digit Oven

Electrolux Skyline

Oven 06-10grids – Hood Level 4

Quenching modification procedure

Remove the screw in the inlet (position 4) of the

vapour exhaust pipe

Insert the new metal component supply from above

into the vapour exhaust pipe (pay attention to the

position of the side hole, at the bottom, as shown in

the picture below, axial orientation is irrelevant).

Rel.

210220

pag. 2