- ページ 15

換気フード Electrolux AEG DD9663-MのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Electrolux AEG DD9663-M 17 ページ。

Hood body mounting

• Before attaching the hood body, tighten the two screws

Vr located on the hood body mounting points.

• Hook the hood body onto the screws.

• Fully tighten support screws.

• Adjust screws Vr to level the hood body.

Upper exhaust flue

• Slightly widen the two sides of the upper flue and

hook them behind the brackets 7.2.1, making sure

that they are well seated.

• Secure the sides to the brackets using the 4 screws

12c (2,9 x 9,5) supplied.

• Make sure that the outlet of the extensions pieces

is aligned with the chimney outlets.

Lower exhaust flue

• Slightly widen the two sides of the flue and hook

them between the upper flue and the wall,

making sure that they are well seated.

• Fix the lower part laterally to the hood body using

the 2 screws 12c (2,9 x 9,5) supplied.

Electrical connection and working

test:

• Connect the hood to the mains supply.

• Open the upper panel by pressing the A-key (See

Part "USE" ) for at least 2 seconds.

• Remove the metal filters (See Part "MAINTENANCE")

and make sure that the connector piece of the supply

cable is correctly inside the hood socket.

INSTALLATION INSTRUCTIONS

��

�

��