- ページ 9

換気フード Electrolux AEG DD9996-BのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Electrolux AEG DD9996-B 21 ページ。

Changing the Halogen Spot Lamp

• Extract the lamp from the lamp holder by pulling

gently.

• Replace with another of the same type, making sure

that the two pins are properly inserted in the lamp

holder socket holes.

Replacement filters and light bulbs can be

obtained from your local Service Force Centre.

The hood panel opening and closing mechanism is

controlled by a starter motor which is activated by a

fuser. This fuser works only on the starter motor. In case

the fuser gets damaged when the panel is closed it is be

necessary to manually unblock the panel. In this case

proceed as follows:

• Remove the cover placed up on the left side by the 2

screws.

• Unscrew the 2 hexagonal screws(A) by means of an

appropriate tool to open the panel manually.

• After having completely opened the panel remove the

metal grease filters, as explained in the partconcern-

ing the filter cleaning.

• The fuser is placed up on the right side. Turn the fuser

holder as indicated. Replace the fuser with one having

the same features.

• Open the panel by the control board (see par. USE

button L) so the moving arm comes out, and you can

screw again the 2 hexagonal screws(A) previously

removed.

• Put the fuser holder and grease filters into their place

again. Make sure that the hood functions correctly. In

case the panel doesn't work correctly it is necessary

to contact an authorized technician.

• Reassemble the cover placed up on the left side by

the 2 screws previously remouved.

If the fuser gets damaged being the panel open, it is

sufficient to simply remove the grease filters and replace

the fuser.

MAINTENANCE AND CLEANING

�