- ページ 10

換気フード Electrolux DASL82のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux DASL82 20 ページ。 Electrolux extractor hood

10 electrolux

The monitoring functions can only be

set when the ventilation is switched off

and the glass extension cover is not

pulled out.

Grease filter monitor function

The monitor function for the grease filter is

enabled by default. After 40 hours of opera-

tion, indicator light f is continuously illumina-

ted when the hood is extended. It is time to

clean the filter when indicator light f comes

on, if not sooner.

When the filters have been cleaned, press

the function button for 3 seconds until indi-

cator light f goes out (the timer is reset, or

enabled if switched off).

In recirculating mode and when an activated

carbon filter is fitted, it is advisable to enable

the monitor function for the activated carbon

filter. To enable this function, press and hold

button 2 for 10 seconds, until indicator light

C comes on.

After 120 hours of operation, indicator light

C is continuously illuminated when the hood

is extended. The activated carbon filter must

be regenerated after 120 hours. After the

activated carbon filter has been reinserted,

press the function button for 3 seconds until

indicator light C goes out (the timer is reset).

Displaying the Monitoring Functions

Pressing the function key makes the LEDs

for counters f and C light up, when they are

active.

Light

Function button

Grease ﬁlter

Function button

Activated charcoal ﬁlter